Samsung AM***MXWA Series - Tact Switch Option Setting

ENGLISH-73
02 INSTALLING THE PRODUCT
Setting outdoor unit key function
K1 K2 K3 K4
< A type > < B type >
Installing and setting the option with tact switch and explanation of the functions
Setting the option
1. Press and hold K2 to enter the option setting. (Only available when the operation is stopped)
- If you enter the option setting, display will show the following. (If you have set the 'Emergency operation for
compressor malfunction', 1 or 2 will be displayed on Seg 4.)
- Seg 1 and Seg 2 will display the number for selected option.
- Seg 3 and Seg 4 will display the number for set value of the selected option.
2. If you have entered option setting, you can shortly press the K1 switch to adjust the value of the Seg 1, Seg 2 and select
the desired option. (Refer to pages 74~77 for the Seg number of the function for each option)
Example)

3. If you have selected desired option, you can shortly press the K2 switch to adjust the value of the Seg 3, Seg 4 and change
the function for the selected option. (Refer to pages 74~77 for the Seg number of the function for each option)
Example)
