Samsung AM300MXVGNR4ET - Single Installation Refrigerant Charging

93
ENGLISH
Charging refrigerant
ťʪɇϑʪѣϩ˵ʪ˙ͱͱи˝иϩ˵ʒʪɵʪͱϩ˵ʪθʪ˙θ˝ʪθɇϩʀ˵ɇθ˝ʪɇɵʪϑЇΧΧʪʒиϩ˵ϩ˵ϑΧθͱʒЇʀϩɇʒ
ͱϩ˵ϑɇЇɇ࢏

: The factory refrigerant charge of the product.

ࡤƟ˵ʪɇʒʒϩͱɇθʪ˙θ˝ʪθɇϩɇͱЇϩʀ˵ɇθ˝ʪʒϩ˵ʪѣʪʒ࢏

+ : The total refrigerant charge.
d
Indoor unit
Outdoor
unit
Refrigerant type GWP value
R-410A 2088
Unit Kg ϩAĮࠂʪ
, a
, b
+ , c
࡛GWP=Global Warming Potential
࡛Calculating tCO
2
e : kg x GWP / 1000
a Factory refrigerant charge of the product: see unit name plate.
b ʒʒϩͱɇθʪ˙θ˝ʪθɇϩɇͱЇϩʀ˵ɇθ˝ʪʒϩ˵ʪѣʪʒ࢏࣑ŵʪ˙ʪθϩͱϩ˵ʪɇɵͱЭʪ˙ͱθɇϩͱ˙ͱθϩ˵ʪ
quantity of refrigerant replenishment.)
c Total refrigerant charge.
d Refrigerant cylinder and manifold for charging.
NOTE
࡛Ɵ˵ʪѣʪʒࣛͱЇϩɇɵʪЇϑϩɵʪɇʒ˵ʪθʪʒϩ˵ʪΧθͱуϩцͱ˙ϩ˵ʪΧθͱʒЇʀϩʀ˵ɇθ˝˝Χͱθϩ࢏
(ex. onto the inside of the stop valve cover.)
CAUTION
Single installation
 Open the manifold gauge valve connected to the liquid side service valve and add the liquid refrigerant.
 If you cannot add the whole quantity of the refrigerant while the outdoor unit is stopped, open the gas side
and liquid side service valve. Then, add remaining refrigerant by pressing the refrigerant adding button of
the outdoor PCB.
Gas side
Scale
R-410A (Inject
liquid refrigerant)
Liquid side
Vacuum port
Manifold gage
Service valve
Outdoor unit