Samsung ASH-0906ER - Flare Modification Procedure

Samsung Electronics
3-9
Operating Instructions and Installation
3-2-2(f) Flare Modification
● Tools used
Outer diameter A(mm)
∅6.35mm 1.3
∅9.52mm 1.8
∅12.7mm 2.0
* Unproper flaring
Inclined Surface
damaged
Cracked Uneven
thickness
D
A
3) Insert a flare nut into the pipe and
modifty flare.
90
Slanted
Rough
Pipe
Reamer
Flare modification procedure
1) Cut the pipe using a pipe cutter.
2) Remove burrs at the tip of the pipe cut.
Caution : Burrs not removed may result in
leakage of gas.