Samsung Electronics
4-1
4. Disassembly and Reassembly
Stop operation of the air conditioner and remove the power cord before repairing the unit.
4-1 Indoor Unit
No
1 Front Grille 1) Stop the air conditioner operation and block
the main power.
2) Open the cover screw and loosen three fixing
screws of front grille.
3) Contract the second finger to the left, and
right handle and pull to open the inlet grille.
4) Take the left and right filter out.
5) Take the electroprecipitator out.
6) Loosen the two of the fixing screws.
7) Loosen one of the right fixing screws and
separate the terminal cover.
8) Pull the upper center of discharge softly for
the outside cover to be pulled out.
Parts Procedure Remark
To Next Page
Loading...
