Samsung Electronics
4-4
Disassembly and Reassembly
No
4 Fan Motor and
Cross Fan
Heat Exchanger
8) Lifting the heat exchanger up a little to turn
to the counter clockwise fot separation from
the indoor unit.
1) Do 1, 2 and 3, above.
2) Loosen the fixing screws of motor and lift
the fixing hole up in forward direction and
push backward to separate.
3) Loosen the fixing screws of motor fan. (By
use of M3 wrench.)
Separate the motor from the fan.
Separate the fan from the left holder bearing.
Parts Procedure Remark
Assembling Method
●Insert the left and right brackets of the
outer cover of indoor unit. If it is not
Inserted, the distance of water bate is
not constant and the front grill is not
assembled.
To Next Page
Loading...
