20_ connections
connections
This section involves various methods of connecting the Blu-ray Disc Player to other
external components.
CONNECTING TO A TV WITH AN HDMI CABLE
Using an HDMI-HDMI cable (not included) connect the HDMI OUT terminal on the rear of the Blu-ray Disc Player
to the HDMI IN terminal of your TV.
Press the input selector on your TV remote control until the HDMI signal from the Blu-ray Disc Player appears on
your TV screen.
If you have set the remote control to properly operate with your TV (see pages 18~19), press the TV INPUT
SEL. button on the remote control and select HDMI as the external source of the TV.
If the HDMI cable is connected or removed during playback of a CDDA, MP3 or JPEG fi le, the player will stop
playing.
1.
2.
•
M
HDMI cable
(not included)
To Next Page
Loading...
