Optimizing Picture Settings based on the Type of External Device
Achieve the optimal viewing experience for the type of external device being used.
Optimizing the Picture for Gaming
Settings General External Device Manager Game Mode
Optimal picture settings for gaming using consoles like PlayStation™, Xbox™ or Nintendo Switch™.
This function is supported by TU7 series.
Not available while watching a broadcast.
There may be slight screen shaking.
Enabling Game Mode automatically sets Picture Mode and Sound Mode to Game. Sound Mode may not be automatically
switched depending on the selected audio device on the Sound Output menu.
To connect a different device to the same port, unplug the gaming console, disable the feature, and then connect the other
device.
The Game Mode functions used for Nintendo Switch™ are subject to change without prior notice.
Using Input Signal Plus Features
Settings General External Device Manager Input Signal Plus Try Now
Expands the input signal range for HDMI connections.
Move the port you wish to apply Input Signal Plus to and set it to On by pressing the Select button. The screen may icker.
With external devices that support FHD frequency or up to UHD 24Hz / UHD 30Hz frequency only, Input Signal Plus may not
work properly when activated. In this case, disable the Input Signal Plus feature.
For more information about UHD resolution, see the “UHD Compatibility” section.
This function is supported by TU7 series.
Using HDMI Black Level
Settings General External Device Manager HDMI Black Level Try Now
Optimize the brightness and contrast levels of HDMI images by adjusting the signal's black level. Doing so helps
prevent screen burns and improve contrast and vibrance.
Only available if the input signal from the external device connected to the HDMI port is RGB444.
- 58 -
To Next Page
Loading...
