There is something wrong
with the TV
Try this!
The colors don't appear
vibrant or the picture isn't
bright enough.
Go to Picture and adjust the Picture Mode, Brightness, Sharpness, and Color settings.
•
Settings Picture Picture Mode
• Settings Picture Expert Settings Brightness
• Settings Picture Expert Settings Sharpness
• Settings Picture Expert Settings Color
See if Power Saving Mode has been enabled.
• Settings General Eco Solution Power Saving Mode
Try resetting all the picture settings.
• Settings Picture Expert Settings Reset Picture
There is a dotted line
along the edges of the
screen.
Change the aspect ratio to 16:9 Standard.
•
Settings Picture Picture Size Settings
Change the external device's display resolution setting.
The picture is black and
white.
Use a composite cable when you connect AV equipment to the TV.
If using the composite cable, connect the video cable (yellow / green) to the yellow / green
component port.
컴포넌트 입력 port may not be supported depending on the model .
The picture won't display
in full screen.
Black boxes will appear on either side of the screen when viewing standard-quality content
(4:3) on an HD channel.
Black boxes will appear at the top and bottom of the screen when watching a movie whose
aspect ratio differs from that of the TV.
Adjust the external device's aspect-ratio setting or set the TV to full-screen mode.
• Settings Picture Picture Size Settings
The subtitle option on the
TV menu doesn’t work.
Caption option is not available for external devices that have been connected to the TV via an
HDMI cable or a component cable. Try enabling captions on the external device.
Subtitles are shown on
the screen.
Go to Caption Settings and disable Caption.
•
Settings General Accessibility Caption Settings Caption
The connected external
device’s HDR feature has
been disabled.
Go to the Input Signal Plus option and expand the reception range for the concerned HDMI
source.
•
Settings General External Device Manager Input Signal Plus
- 96 -
To Next Page
Loading...
