Plug In Module
To use Plug In Module, make sure you connect a Samsung PIM (sold separately).
To connect a device made by another manufacturer, ensure the device is compatible with Open Pluggable Specification (OPS) standards.
―
For details on how to connect a device, refer to the user manual provided with the PIM upon purchase.
―
To obtain optimum audio quality, configure the HDMI audio settings using the Windows Control Panel on the OPS device.
For products made by other manufacturers, this only applies to HDMI-compatible devices.
―
To enable sound output from the product with an OPS device that does not support HDMI, configure the analogue audio settings using the Windows Control Panel, go to Plug In Module > Edit Name and set the
input source to PC, DVI PC or DVI.
Attaching the PIM (Sold separately)
Unfasten the highlighted screws, and then
detach the COVER PIM.
Unfasten the highlighted screws. Place the PIM as shown. Place the PIM as shown, and then fasten the
screws.
To Next Page
Loading...
