Picture Options
Color Tone
Digital Clean View
MPEG Noise Filter
HDMI Black Level
Film Mode
Dynamic Backlight
O
O
O
Normal
O
O
-
The displayed image may differ depending on the model.
Color Tone
If the input source is PC, DVI or HDMI (PC connection), DisplayPort.
•
Off / Cool / Standard / Warm
If the input source is AV, Component, HDMI or TV.
•
Off / Cool / Standard / Warm1 / Warm2
―
If Picture Mode is set to Calibration, Color Tone is disabled.
―
Settings can be adjusted and stored for each external device connected to an input on the product.
Digital Clean View
If the broadcast signal received by your product is weak, you can activate the Digital Clean View feature to reduce any static
and ghosting that may appear on the screen.
•
Off / Low / Medium / High / Auto / Auto Visualization
―
Auto Visualization: When changing analog channels, displays signal strength.
―
Received signal intensity is the strongest when the bar is green.
―
When the signal is weak, try all the options until the the product displays the best picture.
MPEG Noise Filter
Reduces MPEG noise to provide improved picture quality.
•
Off / Low / Medium / High / Auto
To Next Page
Loading...
Need help?
General
