49
A / S / M
In this mode you can select the shutter speed or aperture value as your preference.
1. Rotate the mode dial to the A/ S/ M mode and press the MENU button.
2. Press the DOWN and the cursor will be shifted to the main menu.
3. Select [A/S/M] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [A/S/M] sub menu.
Press the OK button to confirm the setting.
Press the menu button twice and the menu display will be disappeared. Take a picture.
Select the desired sub menu by pressing the UP/DOWN button.
Aperture priority ( A ) : You can select the aperture value in this
mode.The camera calculates the best
shutter speed automatically to make
proper exposure value.
Shutter priority ( S ) : You can select the shutter speed in this
mode.The camera calculates the best
aperture value automatically to make
proper exposure value.
Manual ( M ) : You can select the shutter speed and the
aperture value in this mode.
EXIT: MENU
PORTRAIT SETUP MyCAM
PAGE :
SIZE
QUALITY
METERING
SHOOTING
L 2272X1753
FINE
MULTI
SINGLE
INFORMATION
After pressing the shutter button half way down, the values that were changed in the A/S/M
mode will be applied to the picture.
If the aperture value or shutter speed is out of the limit of application, the value that is
displayed on the LCD monitor is turned to red. But you can take a picture.
It warns that : To be the proper exposure, the aperture
value is smaller than F 2.8.
But the minimum aperture value that you can select is F
2.8.
To Next Page
Loading...
Need help?
General
