To Next Page
B
brookstiffanyAug 15, 2025
Why is there no audio on my Samsung DVD-E232 DVD Player?
- MmfisherAug 15, 2025
Ensure that you have selected the correct Digital Output in the Audio Options Menu.
Why is there no audio on my Samsung DVD-E232 DVD Player?
Ensure that you have selected the correct Digital Output in the Audio Options Menu.
What to do if my Samsung DVD-E232 DVD Player remote is not working?
First, check and replace the batteries in the remote if needed. Then, make sure you are operating the remote control within 20 feet of the DVD player. As a last resort, try resetting the remote by removing the batteries, holding down one or more buttons for several minutes, and then reinstalling the batteries.
What to do if my Samsung DVD-E232 DVD Player disc does not play?
First, ensure that the disc is installed with the label side facing up. Then, check the region number of the DVD to ensure it is compatible with your player.
Why is 5.1 channel sound not working on my Samsung DVD Player?
5.1 channel sound is only available if: the DVD player is connected to the correct amplifier, the disc is recorded with 5.1 channel sound, the disc has the “Dolby 5.1 ch” mark, your audio system is correctly connected and working, and the Audio Output is set to Bitstream in the SETUP Menu.
Why can't I change the screen ratio on my Samsung DVD-E232?
The screen ratio might be fixed on your DVDs.
I forgot my Samsung DVD-E232 password, what to do?
To reset your password: power on the unit without a disc inside. Press the STOP and PLAY buttons simultaneously on the front panel for three seconds. Select your language. Press the MENU button to select Parental Mode. The Parental Mode will be unlocked. Press the DOWN button to select Parental, then press ENTER. The Create Password display will appear, allowing you to set a new password and rating level.
Why does the icon appear on my Samsung DVD-E232 screen?
The icon appears because the DVD’s software restricts the feature or action, the software doesn’t support the feature, the feature is unavailable, or the requested title, chapter number, or search time is out of range.
Why does play mode differ from the Setup Menu selection on my Samsung DVD-E232?
Some functions selected in the Setup Menu may not work properly if the disc is not encoded with the corresponding function.
Why doesn’t the disc menu appear on my Samsung DVD-E232?
Check if the disc has a Menu.
General| Type | DVD Player |
|---|---|
| Progressive Scan | No |
| Remote Control | Yes |
| Video Playback | Yes |
| Audio Playback | Yes |
| Playback Formats | CD, DVD |
| Disc Formats | DVD-R, DVD-RW, CD-R, CD-RW |
| Video Output | Composite |
| Output Resolution | 480p |
