Why is the picture noisy or distorted on my Samsung DVD-HD850 DVD Player?
If the picture on your Samsung DVD Player is noisy or distorted, ensure that the disc is not dirty or scratched. If it is, clean the disc.
How to troubleshoot no HDMI output on Samsung DVD Player?
If you're getting no HDMI output from your Samsung DVD Player, first, check that the Video output is HDMI enabled. Next, verify the connection between the TV and the HDMI jack on the DVD player. Finally, confirm that your TV supports the DVD player's output resolution (480p/720p/768p/1080i).
Why is there HDMI output judder on my Samsung DVD-HD850 DVD Player?
If you're experiencing judder with the HDMI output on your Samsung DVD Player, check if your TV system setup is correct. The judder might occur when the frame rate is converted from 50Hz to 60Hz for 720P/1080i HDMI Output.
What to do if I see snow noise on my Samsung DVD-HD850's HDMI output?
If your Samsung DVD Player's HDMI output is showing snow noise, it indicates that your TV does not support HDCP (High-bandwidth Digital Content Protection).
How to reset blocked screen of Samsung DVD-HD850?
To reset a blocked screen on your Samsung DVD Player, press the button for more than 5 seconds with no disc inside. This will revert all settings to the factory settings.
How to fix Samsung DVD-HD850 remote control not working?
If your Samsung DVD Player remote control isn't working, first, try replacing the batteries. If that doesn't solve the issue, make sure you're within 20 feet of the DVD player when using the remote. As a last resort, you can reset the remote by removing the batteries, holding down one or more buttons for several minutes, and then reinstalling the batteries.
How to reset forgotten password on Samsung DVD Player?
If you forgot the password for your Samsung DVD Player, press the button for more than 5 seconds with no disc inside. This will revert all settings, including the password, to the factory defaults. Use this method only when absolutely necessary.
How to fix no audio on Samsung DVD-HD850 DVD Player?
If you're getting no audio from your Samsung DVD Player, ensure that you have selected the correct Digital Output in the Audio Options Menu.
Why is 5.1 channel sound not working on my Samsung DVD-HD850?
If you're not getting 5.1 channel sound from your Samsung DVD Player, ensure that: 1) The DVD player is connected to the proper amplifier. 2) The disc is recorded with 5.1 channel sound. Check if the disc has the “5.1 ch” mark. Confirm your audio system is correctly connected and working. Also, check in the SETUP Menu if the Audio Output is set to Bitstream.
Why is there no audio from my Samsung DVD Player?
If you're not getting any audio from your Samsung DVD Player, check that you've selected the correct Digital Output in the Audio Options Menu.
General| I/O ports | 1 x S-Video in, 1 x S-Video out, 1 x DVI, 1 x SCART |
|---|---|
| Dimensions (WxDxH) | 430 x 240 x 45 mm |
To Next Page
