What to do if my Samsung DVD-HD950 remote control is not working?
Here are a few things to try: * Check the batteries in the remote control and replace them if needed. * Make sure you are operating the remote control within 20 feet of the DVD player. * Try resetting the remote control by removing the batteries, holding down one or more buttons for several minutes, then reinstalling the batteries.
Why is 5.1 channel sound not working on my Samsung DVD-HD950?
5.1 channel sound requires specific conditions: the DVD player must be connected to a compatible amplifier, and the disc must be recorded with 5.1 channel sound. To troubleshoot: * Check the DVD for a “5.1 ch” mark. * Verify that your audio system is properly connected and functioning. * Confirm that the Audio Output in the SETUP Menu is set to Bitstream.
Why is there no 5.1 channel sound from my Samsung DVD-HD950?
5.1 channel sound is only reproduced when the DVD player is connected with the proper Amplifier and the disc is recorded with 5.1 channel sound. Check whether the disc being played has the '5.1 ch' mark on the outside. Check if your audio system is connected and working properly. In a SETUP Menu, is the Audio Output set to Bitstream?
Why is there no sound when connecting Samsung DVD Player to TV via HDMI?
If you're getting no sound when connecting your Samsung DVD Player to your TV via HDMI, it might be due to compatibility issues. If your TV doesn't support compressed multi-channel formats like Dolby Digital, DTS, or MPEG, set Digital Audio to PCM. Also, if your TV doesn't support LPCM sampling rates over 48kHz, enable PCM Down sampling.
Why is my Samsung DVD-HD950 not playing discs?
If your Samsung DVD Player isn't playing discs, ensure that the disc is placed with the label side facing up. Also, verify that the region number of the DVD is compatible with your player.
What to do if Samsung DVD-HD950 remote control not working?
First, check and replace the batteries in the remote control. Ensure you are within 20 feet of the DVD player when operating the remote. If it still fails, remove the batteries, press and hold any button for several minutes to reset the remote's microprocessor. Then, reinstall the batteries and try again.
How to fix no HDMI output on Samsung DVD-HD950 DVD Player?
First, ensure that the Video output is HDMI enabled. Then, verify the connection between your TV and the HDMI jack on the DVD player. Finally, confirm that your TV supports the DVD player's output resolution (480p/576p/720p/768p/1080i).
How to reset a locked screen on a Samsung DVD-HD950?
Press the button for more than 5 seconds with no disc inside and the tray closed. All settings will revert to the factory settings.
What to do if my Samsung DVD-HD950 DVD Player disc does not play?
First, make sure that the disc is installed with the label side facing up. Also, check the region number of the DVD to ensure it is compatible with your player.
General| I/O ports | Coaxial Digital out Optical Digital out L/R Stereo out 5.1 Channel Audio Out Composite Video out Component Video out S-Video out |
|---|---|
| Dimensions (WxDxH) | 430 x 251 x 58 mm |
| Disc types supported | CD-R, CD-RW |
| Number of optical discs | 1 discs |
| Product color | Black |
Weight and Dimensions| Weight | 2100 g |
|---|
To Next Page
