HDMI Input
OR
DVI Input
DVI Audio
Input
1. Connect an HDMI cable to the TV and set TV input to “HDMI”.
2. Turn on the DVD player.
3. The DVD player Output is setted HDMI / COMPONENT
(P-SCAN) out automatically within 10 seconds.
1. Connect an HDMI-DVI cable and an audio cable to the TV and
set TV input to “DVI”.
2. Turn on the DVD Player.
3. The DVD player Output is setted HDMI / COMPONENT
(P-SCAN) out automatically about within 10 seconds.
* If an HDMI or an HDMI-DVI cable is unplugged in TV, the
player output goes back COMPOSITE/S-VIDEO out.
* If you want to use an analog Video Output, unplug an HDMI
or HDMI-DVI cable.
* If you set the HDMI output resolution 720P or 1080i, HDMI
output provides better picture quality.
HDMI-DVI Setup
HDMI Setup
HD950-Setup Guide-XEU 4/19/05 9:59 PM Page 1
To Next Page
