What to do if I forgot the password on my Samsung DVD Player?
Press the button for more than 5 seconds with no disc inside and the tray closed. All settings including the password will revert to the factory settings. Don't use this unless absolutely necessary.
What to do if my Samsung DVD-HD950 DVD Player disc does not play?
First, make sure that the disc is installed with the label side facing up. Also, check the region number of the DVD to ensure it is compatible with your player.
How to reset a locked screen on a Samsung DVD-HD950?
Press the button for more than 5 seconds with no disc inside and the tray closed. All settings will revert to the factory settings.
How to fix no HDMI output on Samsung DVD-HD950 DVD Player?
First, ensure that the Video output is HDMI enabled. Then, verify the connection between your TV and the HDMI jack on the DVD player. Finally, confirm that your TV supports the DVD player's output resolution (480p/576p/720p/768p/1080i).
What to do if Samsung DVD-HD950 remote control not working?
First, check and replace the batteries in the remote control. Ensure you are within 20 feet of the DVD player when operating the remote. If it still fails, remove the batteries, press and hold any button for several minutes to reset the remote's microprocessor. Then, reinstall the batteries and try again.
Why is my Samsung DVD-HD950 not playing discs?
If your Samsung DVD Player isn't playing discs, ensure that the disc is placed with the label side facing up. Also, verify that the region number of the DVD is compatible with your player.
How to unblock the screen on a Samsung DVD Player?
Press and hold the button for more than 5 seconds while there is no disc inside the player. This will revert all settings to the factory defaults.
What to do if there is no sound when connecting Samsung DVD Player to TV via DVI?
When using an HDMI-DVI cable, remember it only carries video. To get sound, you need to connect separate left and right audio cables from your Samsung DVD player to the DVI audio inputs on your TV.
How to restore factory settings on a Samsung DVD-HD950 DVD Player?
If the screen is blocked, press the button for more than 5 seconds with no disc inside the player. This will revert all settings to the factory defaults.
What to do if there is no audio from my Samsung DVD Player?
If there's no audio from your Samsung DVD Player, make sure you have selected the correct Digital Output in the Audio Options Menu.
General| I/O ports | Coaxial Digital out Optical Digital out L/R Stereo out 5.1 Channel Audio Out Composite Video out Component Video out S-Video out |
|---|---|
| Dimensions (WxDxH) | 430 x 251 x 58 mm |
| Disc types supported | CD-R, CD-RW |
| Number of optical discs | 1 discs |
| Product color | Black |
Weight and Dimensions| Weight | 2100 g |
|---|
To Next Page
