21
Connecting to a network
" Connecting parts may differ in different products.
Network settings (Wired)
Connecting to a wired network
•
The modem port on the
wall
Modem cable
•
connection. See the diagram below.
The modem port on the
wall
Modem cable
•
See the diagram below. Note that the wall outlet is attached to a modem or router
elsewhere in your house.
The modem port on the
wall
automatically provide the IP address, subnet mask, gateway, and DNS values your product
needs to access the Internet so you do not have to enter them manually. Most home
networks are Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you
must enter the IP address, subnet mask, gateway, and DNS values manually on your product
Cable Setup Screen when you set up the network connection. To get the IP address, subnet
If you have a Windows computer, you can also get these values through your computer.
"
address.
"
To Next Page
Loading...
