Connecting using a OPS (Sold separately)
" OPS is only available for WM75B/WM85B.
Touchscreen may not work properly during initial OPS Windows settings. Connect a mouse
and keyboard to OPS for use during initial settings.
" Turn off Flip before connecting OPS.
Connecting via the Wireless Display function
" This function is only available for the laptop that supports the Wireless Display function.
1
Select Action Center or Devices
2
Click Connect or Project and select a [CLASS] Interactive Signage Flip device to complete
the connection.
" The connection procedure may vary depending on the laptop.
" Wireless Display connection is made, you can control the laptop screen from the
product screen.
" This function is only supported by Windows 8.1 and 10.
To Next Page
Loading...
