Using the Ring
27
Cycle tracking
Track your menstrual cycle and predict the date of your next period by measuring your
skin temperature while you sleep.
•
This feature is only for managing and tracking your menstrual cycle. Therefore,
do not use it for medical purposes, such as diagnosing the symptoms, treatment,
or prevention of disease.
•
This feature is not intended to be used for pregnancy planning or contraception
purposes.
•
Predicted dates are only for personal reference. Predicted dates may differ from
actual dates.
•
Individuals under the age of 18 should use this feature with a guardian.
•
Do not make any medical decisions based on predicted dates without consulting
a physician. Also, do not use the information provided by the Samsung Health
app or take medical actions without consulting with a qualified medical expert.
•
Turn on the cycle tracking feature in the Samsung Health app on your phone to
use this feature.
•
Predicted dates may vary depending on the input information.
•
This feature may not be available depending on the region.
1 On the connected phone, open the
Galaxy Wearable
app.
2 Tap
Health settings
.
3 Tap the
Predict period with skin temp
switch to turn it on.
4 Set your period’s start date and end date, and tap
Next
.
5 Set your cycle length and tap
Done
.
You can check information related to your cycle tracking by accessing the cycle tracking
card on the Samsung Health app of the connected phone.
If you wear another wearable device with your Ring, such as the Galaxy Watch,
the measured skin temperature data is not integrated, and you can select which
wearable device to use to predict your menstrual cycle by measuring your skin
temperature directly in the Samsung Health app on your connected phone.
To Next Page
