37 2B. Making and Answering Calls
Ringtones and Keypad Tones
Set up the device ringtone, device vibration, and
sounds for default notifications. You can also set up
sound and vibration for the phone and notifications.
1. Press and touch .
2. Press > Call Settings > Ringtones and keypad
tones.
3. Configure the following options:
䡲 Device ringtone: Select a default ringtone for
incoming calls.
䡲 Device vibration: Select a default vibration to play
for incoming calls. Or touch
Create to create your
own custom device vibration ringtone.
䡲 Vibrate when ringing: When enabled, the phone
will vibrate and ring for notifications. This setting is
only available when the phone is not in Vibrate
mode.
䡲 Keytones: When enabled, sounds play when you
touch Keypad keys.
Call Alert
Set options for sounds and vibrations during calls.
1. Press and touch .
2. Press > Call Settings > Call alert.
3. Configure options:
䡲 Call vibrations: Enable Vibrate on connection to
network to have your phone vibrate when it
connects to the network. Enable
Call-end vibration
to have the phone vibrate when the other caller
ends the call.
䡲 Call status tones: Choose options for sounds to
play during calls. Enable
Call connect tone to have
the phone play a tone when the other caller
answers a call. Enable
Minute minder to have a
tone play once per minute during a call. Enable
Call end tone to have the phone play a tone when
the other caller ends the call. Touch
OK to save
the settings.
䡲 Alerts during calls: Enable to have notifications for
alarms and new messages play during phone
calls. When disabled, these notifications will be
muted during a call.
To Next Page
Loading...
