2C. Settings 46
Configure Blocking Mode
Choose blocking features to apply when blocking
mode is turned on.
1. Press and touch > Settings > Blocking
mode.
2. Touch the Blocking mode slider to turn
blocking mode On. Blocking mode must be turned
on to configure features.
3. Configure options:
䡲 Features: Choose features to apply when blocking
mode is turned On.
● Disable incoming calls: When enabled,
incoming call notifications are blocked when
blocking mode is turned On.
● Disable notifications: When enabled, new
message notifications are blocked when
blocking mode is turned On.
● Disable alarm and timer: When enabled,
notifications for alarms and timers are blocked
when blocking mode is turned On.
● Disable LED indicator: When enabled, the LED
indicator does not light for notifications when
blocking mode is turned On.
䡲 Set time:
● Always: When enabled, all notifications are
blocked.
● From: When Always is not enabled, choose a
time to start blocking.
● To: When Always is not enabled, choose a
time to end blocking.
䡲 Allowed contacts:
● Allowed contacts: Choose contacts to accept
notifications from them when blocking mode
is turned On.
● Allowed contact list: View and manage the list
of allowed contacts.
To Next Page