LED Color/Patterns Description
Red - Solid
Indicates the AllShare Cast Hub is
booting or processing.
Red - Blinking
Indicates the AllShare Cast Hub is in
standby mode (ready for connection).
Blue - Solid
Indicates the AllShare Cast Hub is
ready to be connected with a new
device.
2. Connect your TV to the AllShare Cast Hub via an HDMI cable
(A-to-A cable).
3. Change the source input on your TV to match the input port
used by the incoming HDMI cable.
Note:
The television screen should now display an on-screen tutorial
showing you how to configure your device’s AllShare Cast Hub
and device settings.
To activate Screen Mirroring on your device:
1. From the main
Settings
page, tap
Connections
tab ➔
Screen
Mirroring
.
2. If not already on, tap the
Screen Mirroring
and then move the
slider to the right to turn it on. The slider color indicates the
activation status.
Multimedia 200
To Next Page
Loading...
