Software Update
The Software Update feature enables you to use your device to
connect to the network and upload any new software directly to your
device. The device automatically updates with the latest available
software when you access this option.
The following icons show your Bluetooth connection status
at a glance:
Displays when the Software updated feature is active.
Displays when the Software update feature is in progress.
To update your device:
1. From the Home screen, press and then tap
Settings
(
More
tab)
About device
Software update
.
2. Read the Software update information screen.
3. Select an available option:
Note:
You configure the device’s software update parameters.
• Cancel
: Tap this option to cancel the operation.
• Wi-Fi settings
: Enable this option to only download available updates via
an active Wi-Fi connection. If disabled, the device will begin available
downloads via its’ cellular connection.
•OK
: Tap this option to connect to the remote server, detect if there is an
available update, the begin the download over your existing data
connection.
Changing Your Settings 396
To Next Page
Loading...
