127
File management
2
Pull out the docomo nano UIM card/microSD memory card
tray in a straight line
3
Place the IC (metallic) face of the microSD card face down
on the docomo nano UIM card/microSD memory card tray
4
Insert the docomo nano UIM card/microSD memory card
tray into the terminal
• TakecaretoinsertthedocomonanoUIMcard/microSDmemory
cardtrayinthecorrectdirection.Ifthedirectionyouinsertthe
docomonanoUIMcard/microSDmemorycardtrayisincorrect,it
maybedamaged.
Removing microSD card
To remove the microSD card, perform "Unmount" (P.124) in advance.
1
Insert the tip of the SIM ejector pin into the docomo nano
UIM card/microSD memory card tray eject hole horizontally
(P.126)
ThedocomonanoUIMcard/microSDmemorycardtraywillslightly
eject.
•
Notinsertingthetoolinastraightlinemightresultindamageora
fault.
2
Pull out the docomo nano UIM card/microSD memory card
tray in a straight line
3
Remove the microSD memory card from the docomo nano
UIM card/microSD memory card tray