Samsung Galaxy S7 Edge - Communication NFC Communication

131
Datacommunication
Whentheotherdevicerequestsforpairing
When pairing request for Bluetooth communication screen appears, tap
"OK"
Cancelingconnection
On the Bluetooth device list, tap a connected device.
Cancelingpairing
1
From the Home screen, → "Settings" → "Bluetooth"
2
of a device you want to cancel pairing → "Unpair"
Sending/ReceivingdataviaBluetooth
• Set the Bluetooth function to ON beforehand to be detectable.
SendingdataviaBluetooth
You can send contacts (contact data in vcf format) or les such as still
images or videos, etc., to a device (PC etc.) compatible with Bluetooth.
• For sending, perform the operation from the menu such as "Share", "Send",
etc., of each application.
ReceivingdataviaBluetooth
1
If "File transfer" screen appears, tap "ACCEPT"
• appears on the status bar and data reception starts.
• Reception condition can be checked by the Notication panel.
• After completion of the reception, display Notication panel and tap
"File received" to display the list of received data. Tap data you want
to view/play, you can check received data.
NFCcommunication
NFC is an abbreviation of Near Field Communication that is an international
standard proximity wireless communication method specied by ISO
(International Organization for Standardization). By using reader/writer
function (R/W) or device communication function (P2P), put the terminal
close to NFC tag to receive data, send/receive data to/from other device
with NFC module installed, etc.
• For holding over the other device, see P.85.
EnablingNFCReader/Writer,P2Pfunction
To send/receive data between the terminal and an NFC equipped
mobile phone etc., turn Reader/Writer, P2P ON.
• When "Android Beam" is set to ON, you can send/receive contents such
as web pages or contacts to/from a device with P2P function installed.
1
From the Home screen, → "Settings" → "NFC/Osaifu-Keitai
settings" → "Reader/Writer,P2P"
2
• To use Android Beam, tap "Android Beam" → on "NFC/Osaifu-
Keitai settings" screen.
Sending/Receivingdata
1
Display a content to send on the terminal/recipient device
2
Put marks of the terminal and the recipient device closer
3
Tap a screen on the terminal/perform sending operation on
the recipient device
• The content is sent/received.
• If the application selection screen appears, select an application to use.
Information
• If you perform sending operations from the terminal and the other
device at the same time, sending may fail.
• While the screen is locked, NFC tag information cannot be sent/received.
• When NFC/Osaifu-Keitai Lock is set, Android Beam cannot be used.
• For some applications, Android Beam is unavailable.
• Actual communications are not guaranteed for all devices equipped
with Reader/Writer, P2P.