23
Getting started
docomo nano UIM card
docomo nano UIM card is an IC card storing user information such
as phone numbers.
• OnlydocomonanoUIMcardisavailablefortheterminal.Ifyouhavea
miniUIM,UIMorFOMAcard,bringittodocomoShoptoreplace.
• IfdocomonanoUIMcardisnotinserted,youcannotusefunctionssuch
ascalling,sending/receivingSMS,packetcommunication.
• InJapan,callstoemergencytelephonenumbers(110,119,118)
cannotbemadeifdocomonanoUIMcardisnotinstalled.
• FordetailsonhandlingdocomonanoUIMcard,refertothedocomonano
UIMcardmanual.
• TheincludedSIMejectorpin(sample)isrequiredtoattach/removethe
docomonanoUIMcard.
Security codes of docomo nano UIM card
The docomo nano UIM card has security code, named PIN code (P.119).
Attaching/Removing docomo nano UIM card
Attaching docomo nano UIM card
1
Insert the tip of the SIM ejector pin into the docomo nano
UIM card/microSD memory card tray eject hole horizontally
ThedocomonanoUIMcard/microSDmemorycardtraywillslightly
eject.
•
Notinsertingthetoolinastraightlinemightresultindamageora
fault.
2
Pull out the docomo nano UIM card/microSD memory card
tray in a straight line
3
Place the IC face of the docomo nano UIM card face down on
the docomo nano UIM card/microSD memory card tray
• FitthedocomonanoUIMcardsecurelyintothetrayoritmaycome
owhenyoutrytoinsertitintotheslot.
Notch
IC
4
Insert the docomo nano UIM card/microSD memory card
tray into the terminal
• TakecaretoinsertthedocomonanoUIMcard/microSDmemory
cardtrayinthecorrectdirection.Ifthedirectionyouinsertthe
docomonanoUIMcard/microSDmemorycardtrayisincorrect,it
maybedamaged.