24
Getting started
Removing docomo nano UIM card
1
Insert the tip of the SIM ejector pin into the docomo nano UIM
card/microSD memory card tray eject hole horizontally (P.23)
The docomo nano UIM card/microSD memory card tray will slightly eject.
• Not inserting the tool in a straight line might result in damage or a fault.
2
Pull out the docomo nano UIM card/microSD memory card
tray in a straight line
3
Remove the docomo nano UIM card/microSD memory card
from the docomo nano UIM card/microSD memory card tray
4
Insert the docomo nano UIM card/microSD memory card
tray into the terminal (P.23)
Information
• For handling the docomo nano UIM card, take care not to touch or
scratch the IC.
• Attaching or removing forcibly may damage the docomo nano UIM
card.
• Be careful not to lose the removed docomo nano UIM card.
• If you lost the SIM ejector pin, you can use a paper clip instead.
Example of a paper clip
To Next Page
Loading...
