Samsung Galaxy S7 Edge - Before Using the Terminal Overseas

135
Internationalroaming
Beforeusingtheterminaloverseas
CheckingbeforeleavingJapan
Check the following for using terminal overseas before leaving Japan.
■ Subscription
• Conrm your application status of WORLD WING. For details, contact
"docomo Information Center" on the last page of this manual.
■ Charging
• Refer to docomo's website.
■ Usage fee
• Overseas usage charge (call and packet communication) di󱐯ers from
those in Japan. For details, see NTT DOCOMO
• As some applications automatically perform packet communications,
the packet communication charge may become expensive. For each
application, conrm with your application provider by yourselves.
Preset
■ Network service
If you subscribed to network services, Voice mail service, Call forwarding
service and Caller ID request service, etc. are available from overseas.
However, some network services may not be used.
• To use network services overseas, you need to activate "Remote
operation settings". Alternatively, you can set "Remote operation
(charged)" overseas. Setting in Japan (P.68), Setting overseas
(P.138).
• Depending on overseas network operators to connect, network
services may not be used even if it can be activate/deactivate.
Checkinginthecountryyoustay
When you arrive overseas and turn on the terminal, an available network is
automatically connected.
■ Connection
The optimum network will be selected automatically if "Select
automatically" is selected in "Network operators".
Settingsforoverseasuse
■ Setting data roaming
To perform packet communications overseas, the data roaming setting
must be turned ON.
1
From the Home screen, → "Settings" → "Mobile networks"
2
"Data roaming" → conrm notes screen and tap "OK"
■ Setting a network operator
By default, the terminal automatically searches available network and
connect to it. To switch network manually, set as follows.
1
From the Home screen, → "Settings" → "Mobile networks"
→ "Network operators" → "Search networks"
• Available networks are displayed.
• When an information screen appears, tap "OK".
• Error occurs in network search, turn "Mobile data" OFF and retry
(P.111).
2
Select the network of overseas network operator
Information
• If you tap "Select automatically" in Step 1, the network that can be
used will be detected and automatically selected.
■ Setting network mode
1
From the Home screen, → "Settings" → "Mobile networks"
→ "Network mode"
2
"LTE/3G/GSM (auto connect)"/"3G/GSM (auto
connect)"/"GSM only"
■ Date and time
When "Automatic date and time", "Automatic time zone" in "Date and time"
are set to ON, the clock time/time di󱐯erence of the terminal is corrected by
receiving information about time/time di󱐯erence from the network overseas
operator.
• Depending on the network provided by overseas network operator,
time/time di󱐯erence correction may not be performed correctly. Set
the time zone manually if it is not performed correctly.
• Correction timing varies by overseas network operator in connection.
• "Date and time" (P.124)