68
Calling
Item Description
Network
services
Remote operation
settings
Activate/deactivate remote operation.
Public mode (power
OFF) settings
While the terminal is OFF or in Airplane
mode, a guidance message indicating
that the receiver is in a place where
power should be turned o is heard on
the caller's terminal and then the call
ends.
Roaming settings → P.137
Call
blocking
Blocking mode Set Block mode.
Block list Manage the phone numbers which
are going to have their incoming
messages blocked.
Call-reject
messages
→ P.68
Call mode setting
Set whether to use VoLTE when
VoLTE calling is available.
Answering
and ending
calls
Pressing the Home
key
Set whether to answer call by
pressing
[Home key].
Automatic
answering
Set whether or not to answer a call
automatically after two seconds when
a headset or a Bluetooth device is
connected to the terminal.
Pressing the
Power key
Set whether to end call by pressing
[Power/Screen lock key].
If it is set to ON, pressing
[Home
key] shows calling screen when the
screen backlight is turned o and the
screen is locked during a call.
Answering
message
settings*
Auto answer with
message
→ P.66
Play answering
message after
→ P.66
Language
→ P.66
Recorded messages
→ P.66
Item Description
Call alerts Vibrate when
answered
Set whether to vibrate the terminal
when the other party answers your call.
Vibrate when call
ends
Set whether to vibrate terminal when
the call ends.
Call connect tone Set whether to sound call connect
tone.
Call end tone Set whether to sound call end tone.
Notify during calls Set whether to sound notication
sound when there is an alarm or SMS
reception.
Auto area code Set the area code to add to the front
of the phone number automatically
when calling.
Suguden settings →P.69
Hide my video Set the image to the other party when
you are not showing the picture of
yourself (P.63).
* Not available for video call.
RegisteringreasonofrejectiontosendviaSMS
whenrejectingcall
The terminal can reject a reception of call and inform the caller of
the reason of rejection by SMS. Up to six rejection messages can be
registered.
• By default, ve rejection messages are registered.
1
From the Home screen, → → "Call settings" → "Call
blocking" → "Call-reject messages"
2
Enter a rejection message →
To edit registered rejection message
Tap a rejection message to edit → Edit the rejection message → Tap
"SAVE".
To delete a rejection message
Tap
of messages to delete.