136
Internationalroaming
■ About inquiries
• If the terminal or the docomo nano UIM card is lost or stolen
overseas, immediately contact DOCOMO from the spot and request
for suspension of usage. Please see the last page of this manual for
contact information. Be careful that you are charged also for calls
and/or communications, if any, occurring after lost or theft.
• For contact from a land-line phone etc., add "International call access
code" or "Universal number international prex" assigned to the
countries.
Making/Receivingcallsinthecountryyoustay
Makingacalltooutsidecountryyoustay(including
Japan)
You can make a call from the country you stay to other country using the
international roaming service.
• For information of available countries or network operators, see NTT
DOCOMO website.
1
From the Home screen, → "Dial"
2
+ (Touch and hold "0") → Country code → Area code (city
code) → Enter a phone number of the other party
• Please omit the prex "0" in the area code (city code). However, "0"
may be required to dial to some countries or areas such as Italy.
3
→ "Call to <country name>"/"Call without int’l prex"
• The country name set in "Country code" of "International dial assist"
is displayed in the above <country name>. For example, in case of "
日本(JPN)" (+81), "Call to Japan" is displayed.
• To make a video call, → "Video call".
4
to end a call
Information
• For the details of video calls, refer to (P.61).
Makingacallwithinthecountryyoustay
You can make a call to a land-line phone or mobile phone in the same way
as in Japan.
1
From the Home screen, → "Dial"
2
Enter a phone number of the other party
3
4
to end a call