Samsung Galaxy S7 Edge - Page 113

111
Settings
Datausage
Enable/disable mobile data communication or set upper limit of data communication.
Also set a period of time for measuring amount of communications.
1
From the Home screen, → "Settings" → "Data usage"
• Data usage screen appears and estimated value of mobile data
usage for a period and for each application.
• Set "Mobile data" ON to enable Internet access via mobile networks.
• Set limit of mobile data communication usage and set to alert when
limit reaches on the chart. To set limit, set "Set mobile data limit"
ON.
Limiting background data communication
You can restrict mobile data communication automatically made by
applications.
On the data usage screen, tap "Background data" to set to OFF the
background data. You can restrict usage of mobile data of Individual
apps.
Displaying status of Wi-Fi use
Estimated amount of Wi-Fi data usage for a period and for each
application.
On the data usage screen, tap "MORE" → "Show Wi-Fi usage" and tap
"Wi-Fi" tab.
Restricting use of Wi-Fi network for using Wi-Fi tethering
Prevent background apps from using specied Wi-Fi network.
On the data usage screen, "MORE" → "Restrict networks" → Tap Wi-Fi
network you want to restrict.
Settingaccesspoint
Access point for connecting the Internet (sp-mode) is already registered.
You can add or change it if necessary. For details on sp-mode, refer to NTT
DOCOMO website.
When using mopera U or Business mopera Internet, add access point
manually.
For details on mopera U, refer to mopera U website.
■ Checking the access point in use
1
From the Home screen, → "Settings" → "Mobile networks"
→ "Access Point Names"
■ Setting an access point additionally
1
From the Home screen, → "Settings" → "Mobile networks"
→ "Access Point Names" → "ADD"
2
"Name" → Enter a name of network prole to create → "OK"
3
"APN" → Enter the access point name → "OK"
4
Enter the other items required by the network operator
• Do not change "MCC" and "MNC" other than 440 and 10,
respectively. If they are changed, they are not displayed on the
screen.
5
"MORE" → "Save"
Information
• When you changed settings of MCC or MNC and access points
are not displayed, initialize the access point or set an access point
manually.
■ Initializing an access point
By initializing an access point, the settings return to the default state.
1
From the Home screen, → "Settings" → "Mobile networks"
→ "Access Point Names
2
"MORE" → "Reset to default" → "RESET"