7-53
Chapter 7 Diagnosis Modes
Saving Images
NOTE: If volume data contains both 4D and 3D Cine images, choose either 4D or 3D for saving.
1. Press the Store button on the control panel. The 3D Data Save screen is displayed on the touch
screen.
2. Specify settings such as Data Type, Save Item, and Volume Format.
3. Tap Save on the touch screen to nish saving. Tap Exit to cancel.
Tips!
Volume Data
1. If volume data contains a Cine image, it is saved at the same time.
2. If images are saved with volume data, they can be converted to new 3D rendering images with
SonoView.
[Figure 7.26 3D Data Save]
Printing Images
Press the Store (or S1, S2, or S3) button on the control panel.
To Next Page