41
CHANGING THE PLAYBACK MODE
You can switch to the playback mode by selecting “Album” on the Home menu. You can also switch the operation mode directly into the playback thumbnail display
by touching the Playback (
) tab on the LCD screen.
The most recently created file is highlighted in the thumbnail view.
The camcorder selects the thumbnail display options based on the standby mode that was last used. However, you can choose the video or photo thumbnail
view display options by touching the Video thumbnail view (
) or Photo thumbnail view ( ) tab on the LCD screen.
•
•
Understanding how to change the operation modes
You can easily change the playback mode by touching the LCD screen or using the button as shown in the following figures:
Smart Auto Manual Art Film
Album Settings
<Video thumbnail view>
Using the Playback ( ) tab
<Photo thumbnail view>
<Video thumbnail view>
<Home menu>
Using the Home ( ) button
STBY 00:00:00 [253Min]
You can choose the thumbnail display type you want by selecting “Thumbnail” in the Settings menu or using the Zoom dial.
¬
page 65
You can switch the playback mode to the recording mode by pressing the Recording start/stop button.
•
•
Basic playback
To Next Page
Loading...
Need help?
General