79
Other settings
Demo
The Demo mode automatically shows you the major functions that
are included with your camcorder so that you can use them more
easily.
1
Press the Home ( ) button
p
touch “Settings”
p
“General”.
2
Touch the desired item next to “Demo”.
> General
Format
ON
Default Set
Language
Demo
3
To exit the menu, touch the Return ( ) tab.
Submenu items
OFF: Disables the function.
ON: Enables the Demo function.
•
•
Using the Demo function
The Demo mode is cancelled in the following cases:
- If the LCD screen is touched.
- If you press any button (Recording start/stop, Home (
), etc.).
However, the camcorder enters the Demo mode automatically
after 5 minutes in STBY mode if it is idle for 5 minutes without an
operation. If you don’t want the Demo function to start, set “Demo”
to “OFF”.
The Demo function does not operate in the following case:
- If you set “Auto Power Off” to “5 Min” and you are using the battery
to power the camcorder, the Auto Power Off function turns the
camcorder off before Demo runs.
To Next Page
Loading...
