28 English
Setup
Initial Settings
Turn on your TV after connecting the product.
When you connect and turn on the product to a
TV for the fi rst time, the Initial Settings screen
appears.
Initial Settings | On-Screen Language
m
Move
"
Enter
Select a language for the on-screen displays.
Български Hrvatski Čeština
Dansk Nederlands
English
Eesti Suomi Français
Deutsch Ελληνικά Magyar
Indonesia Italiano 한국어
Press the ▲▼◄► buttons to select the desired
language, and then press the ENTER button.
Press the ENTER button to select Start.
Press the ▲▼ buttons to select the desired TV
Aspect Ratio, and then press the ENTER button.
(See page 31)
Press the ENTER button again.
If the LAN cable
is not connected, press the BLUE (D) button
on your remote instead to skip a Network
Setting here, fi nish the Initial Settings, and go
to the Home menu. For more information
about the Network setting, go to pages
37~40. When done, go to Step 6.
NOTE
If the LAN cable is connected, the Initial
Settings will be fi nished.
The Home menu appears. (For more
information about the Home menu, please
see page 29.)
1.
2.
3.
4.
5.
✎
6.
Home Menu
d
WPS(PBC)
My Devices Internet Settings
Videos
Photos
Music
My Contents
Function
NOTE
The Home menu will not appear if you do not
confi gure the initial settings except as noted
below.
If you press the BLUE (D) button during the
network setup, you can access the Home
menu even if the network setup is not
completed yet.
If you want to display the Initial Setting screen
again to make changes, select the Initial
Settings. (See page 40)
If you use an HDMI cable to connect the
product to an Anynet+ (HDMI-CEC)-
compliant Samsung TV and 1.) You have set
the Anynet+ (HDMI-CEC) feature to On in
both the TV and the product and 2.) You have
set the TV to a language supported by the
product, the product will select that language
as the preferred language automatically.
If you leave the product in the stop mode for
more than 5 minutes without using it, a screen
saver will appear on your TV. If the product is
left in the screen saver mode for more than 20
minutes, the power will automatically turn off.
•
✎
HT-D7200_ELS_1227.indd 28HT-D7200_ELS_1227.indd 28 2011-12-27 3:28:072011-12-27 3:28:07
To Next Page
Loading...
