52 English
Basic Functions
TRACK 002
03:56
TRACK 004
04:02
TRACK 006
03:40
TRACK 008
03:52
1/2 Page
Audio CD | Music
Close Edit Mode
( )
Page Tools
"
Select
'
Return
TRACK 001
00:43
TRACK 003
04:41
TRACK 005
03:43
TRACK 007
04:06
Selected Items : 3
Select a desired track and press the TOOLS
button.
To play the selected track(s), select Play
Selected in the Tools menu and press
ENTER.
+
00:13 / 00:43
TRACK 001
Audio CD
"
Enter Tools
'
Return
TRACK 001
00:43
TRACK 002
03:56
TRACK 003
04:41
1/3
Music
To return to the Edit Mode, press STOP or
RETURN.
To exit Edit Mode, press the YELLOW(C)
button.
NOTE
You can create a playlist with up to 99 tracks
on Audio CD (CD-DA).
Sound Mode
DSP(Digital Signal Processor) Function
You can select mode to optimize the sound for
sound based on your tastes.
Press the DSP button.
SMART SOUND MP3 ENHANCER
POWER BASS USER EQ DSPOFF
5.
6.
7.
8.
✎
• SMART SOUND : This will regulate and
stabilize the volume level against a drastic
volume change when changing channels or
during a scene transition.
• MP3 ENHANCER : This also helps enhance
your sound experience (ex. mp3 music). You
can upscale your MP3 level sound(24 kHz,
8bit) to CD level sound(44.1 kHz, 16bit).
• POWER BASS : This function stresses low
tones providing thudding sound effects.
• USER EQ : You can confi gure the equalizer
settings manually to your preference.
NOTE
The DSP function is only available with stereo
audio sources such as CDDA, MP3, etc.
V-SOUND (Virtual Sound)
Produces realistic sound through 2.1 channel
audio system with the aid of virtual effects, this
gives you the feeling you are listening to 5.1
channel audio system.
Press the V-SOUND button.
Each time the button is pressed, the
selection changes as follows :
V.SOUND ON V.SOUND OFF
iPod SYNC
If you insert your iPod player in the iPod Dock
that has already been connected to the system,
the video fi les in your iPod player can be played
through the connected TV.
If the video signal does not synchronize
properly with the audio signal, press
iPod SYNC on the remote control to
correct the synchronization.
NOTE
Before you can play the video fi les in iPod player,
the Audio/Video terminals of the TV should be
connected using the Composite cable.
Models below support lip sync settings.
Press iPod SYNC on the remote control to
change audio delay.
Supported Models : classic/3G nano/4G
nano/120GB classic/160GB Classic/5G nano
✎
✎
DSP
V-SOUND
B
HT-D7200_ELS_1227.indd 52HT-D7200_ELS_1227.indd 52 2011-12-27 3:28:342011-12-27 3:28:34
To Next Page
Loading...
