English 19
|
03 Connections
Connecting the FM Antenna
1 . Connect the FM antenna supplied to the FM
ANTENNA Jack.
2 . Slowly move the antenna wire around until you find
a location where reception is good, then fasten it
to a wall or other rigid surface.
|
NOTE
|
This product does not receive AM broadcasts.
Connecting to an iPod/iPhone
Using a USB Cable
Connect an iPod/iPhone using the USB cable to
the front USB port.
5V 500mA
ASC IN
5V 500mA
Using a Dock
To view a video from your iPod on your TV, you must
also connect the Video Out jack on the product to
the Video In jack on your TV. See page 20.
DIGITAL
AUDIO IN
OPTICAL
VIDEO
OUT
AUX
IN
LANiPod
WIRELESS
HDMI IN
2
1
HDMI OUT
FRONT
SURROUND
SPEAKERS OUT
SUBWOOFER
CENTER FRONT
SURROUND
SPEAKER IMPEDANCE : 3
FM ANT
iPod
|
NOTE
|
Make sure to connect the dock connector so that the label “
” faces upward.
Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit
If you attach a Toroidal ferrite core to the power cord of
the main unit, it will help to prevent RF interference from
radio signals.
1. Pull the fixing tab of the Toroidal ferrite core to open
it.
2. Double loop the main unit power cord.
3.
Attach the Toroidal ferrite core to the main unit power
cord as the figure shows and press it until it clicks.
FRONT
FRONT TOP
SPEAKERS OUT
SUBWOOFER
CENTER FRONT
FRONT TOP
SPEAKER IMPEDANCE : 3
LANiPod
WIRELESS