Samsung HT-EM45 - Connecting External Devices

English 17
|
03 Connections
Connecting the FM Antenna
5V 350mA
LAN
WIRELESS LAN
HDMI OUT
AUX
IN
VIDEO
OUT
OPTICAL
DIGITAL
AUDIO IN
IMPEDANCE : 3
SPEAKERS OUT
CENTER
SUBWOOFER
FRONT L SURROUND L
FRONT
R
SURROUND
R
L
R
FM ANT
5V 350mA
LAN
WIRELESS LAN
HDMI OUT
AUX
IN
VIDEO
OUT
OPTICAL
DIGITAL
AUDIO IN
IMPEDANCE : 3

SPEAKERS OUT
CENTER
SUBWOOFER
FRONT
L
SURROUND
L
FRONT
R
SURROUND
R
L
R
FM Antenna (supplied)
1 . Connect the FM antenna supplied to the FM ANTENNA Jack.
2 . Slowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
|
NOTE |

This product does not receive AM broadcasts.
Connecting to an iPod/iPhone
Connect an iPod/iPhone using the USB cable to the front USB port.
5V 500mA
Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit
If you attach a Toroidal ferrite core to the power
cord of the main unit, it will help to prevent RF
interference from radio signals.
1. Pull the fixing tab of the Toroidal ferrite core
to open it.
2. Make a loop twice in the main unit power
cord.
3.
Attach the Toroidal ferrite core to the main unit
power cord as the figure shows and press it
until it clicks.
5V 350mA
LAN
WIRELESS LAN
IMPEDANCE : 3
SPEAKERS OUT
CENTER
SUBWOOFER
FRONT L SURROUND L
FRONT
R
SURROUND
R
HT-EM45_ZA_0417-1(D2D).indd 17HT-EM45_ZA_0417-1(D2D).indd 17 2012-04-17 오후 6:29:432012-04-17 오후 6:29:43