iDCS 100 INSTALLATION
TECHNICAL MANUAL PART 10 JUNE 2002
10.2
!
MMC 119 CID DISPLAY This MMC is used by the end user to determine
which piece of Caller ID data is displayed when a
call rings at the user’s station.
!
MMC 501 SYSTEM TIMERS This MMC has two new timers related to Caller ID.
The only timer that may need adjustment is the
CID DISPLAY TIME. This is the length of time that
CID data will be displayed after the CID key is
pressed.
!
MMC 415 TRK ABANDON This MMC is used by the technician to determine
which trunks will record data in the Call Abandon
list and print with an Abandon “A” flag on SMDR.
!
MMC 608 CID BLOCK This MMC is used by the technician to assign CID
Review blocks to keysets to allow the user to
review CID data for previous calls.
!
MMC 701 CLASS OF SERVICE All of the Caller ID features have been added to
this MMC to enable the technician to allow or
deny them.
!
MMC 724 NUMBER PLAN The Caller ID features have been added to this
MMC to allow a technician to assign an access
code where necessary.
To Next Page
Loading...
