32
HEADSET OPERAT I O N
Keyset users can switch between headset mode and handset mode.
When using headset mode, press the A N S / R L S key to answer and
release calls.
• While on-hook, press T R S F followed by 11 0.
• Dial 2 1 to use the headset or 2 0 to use the handset.
• Press T R S F to store your selection.
NOTES: 1. When you are in headset mode, your speakerphone is
d i s a b l e d .
2. When you place your keyset in headset mode, the
A N S / R L S key will light steady to indicate headset mode.
HOT KEYPA D
Hot Keypad allows the user to activate features without the need to
lift the handset or press S P E A K E R f i r s t
To activate this feature.
• While on-hook, press T R S F followed by 11 0.
• Dial 3 1 to turn the Hot Keypad on or 3 0 to turn it off .
• Press T R S F to store your selection.
KEY CONFIRMATION TO N E
A short beep (confirmation tone) each time you press a button on the
dial pad. This tone can be turned on or off .
• While on-hook, press T R S F followed by 11 0 .
• Dial 4 0 to turn tones off or 4 1 to turn tones on.
• Press T R S F to store your selection.
REJOINING A PA G E
Allows keyset users to hear the remaining portion of an ongoing
internal page after completing a call.
To enable this feature:
• While on-hook, press T R S F followed by 11 0.
• Dial 5 1 to turn this feature on or 50 to turn it off .
• Press T R S F to store your selection.
»£¡÷«‚USER- ∫ª πÆ 98.7.16 12:52 PM ∆‰¿Ã¡ˆ32
To Next Page
Loading...
