English - 8
Placing Your Television in Standby Mode ¦
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you
wish to interrupt viewing temporarily (during a meal, for example).
1. POWER
P
button on the remote control.
The screen is turned off and a standby indicator appears on your set. N
2. POWER
P
button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to N
unplug the set from the mains and aerial.
Plug & Play Feature ¦
1. POWER button on the remote control. The message You can set the menu
language. is displayed.
2. ENTER
E
3. Store Demo or Home Use, then the ENTER
E
button.
N Home Use mode for the best picture in your home environment.
Store Demo N mode is only intended for use in retail environments.
If the unit is accidentally set to N Store Demo mode and you want to return to Home Use (Standard
MENU button on the TV for 5 seconds.
4. ENTER
E
ENTER
E
button to
5. Air or Cable, then press the ENTER
E
button.
Air: Air N antenna signal.
Cable: Cable antenna signal.
6. ENTER
E
button to select Start.
Digital & Analogue N
Digital
Analogue
N Cable, a step appears allowing you to set a value for the digital channel search. For
more information, refer to Channel→AutoStore.
The channel search will start and end automatically. N
N ENTER
E
button at any time to interrupt the memorization process.
After all the available channels are stored, the message N Set the Clock Mode. is displayed.
7. ENTER
E
AutoENTER
E
button.
If you select N Manual, Set current date and time is displayed.
If you have received a digital signal, the time will be set automatically. If not, select N Manual
20)
8. ENTER
E
button.
9. The message Enjoy your TV!ENTER
E
button.
If you want to reset this feature...
1. MENUSetup, then press the ENTER
E
button.
2. ENTER
E
button again to select Plug & Play.
3. 0-0-0-0.
N Change PIN function. (refer to page 22)
The N Plug & Play feature is only available in the TV mode.
Plug & Play
You can set the menu language.
E
Enter
BN68-03043A.indb 8 2010-04-14 �� 4:56:26
To Next Page
Loading...
