English - 20
SETUP
ConguringtheSetupMenu ¦
Menu Language ❑
You can set the menu language.
Time ❑
Clock
The current time will appear every time you press the N INFO button.
N
Clock Mode
You can set up the current time manually or automatically.
Auto –
Manual –
Depending on the broadcast station and signal, the auto time may not be set correctly. If this occurs, set the time N
manually.
The Antenna or cable must be connected in order to set the time automatically. N
Clock Set
You can set the current time manually.
Set up this item when you have set N Clock Mode to Manual.
You can set the day, month, year, hour and minute directly by pressing the number buttons on the remote control. N
SleepTimer→Off/30min/60min/90min/120min/150min/180min
The TV automatically switches to standby mode when the timer reaches 0. N
To cancel the N Sleep Timer function, select Off.
T TOOLS button to display the Tools menu. You can also set the sleep timer by selecting Tools→SleepTimer.
Timer 1 / Timer 2 / Timer 3
On Time Activate.)
Off Time Activate.)
Volume
Antenna Air or Cable.
Channel
Repeat Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
N ManualENTER
E
button over the
desired day and the
c
You can set the hour, minute and channel by pressing the number buttons on the remote control. N
Auto Power Off N
on for too long time.
MenuLanguage :English ►
Time
Broadcast
Security
General
Setup
BN68-03043A.indb 20 2010-04-14 �� 4:56:28
To Next Page
Loading...
