English - 24
Software Upgrade ❑
are periodically broadcast as part of the normal Television signal. It will automatically detect
these signals and display the software upgrade banner. You are given the option to install the
upgrade.
BY USB
disconnect the power or remove the USB drive while upgrades are being applied. The TV will
their default (factory) settings.
BY Channel
Upgrades the software using the broadcasting signal.
If the function is selected during the software transmission period, this function searches for available software and downloads N
the software.
The time required to download the software is determined by the signal status. N
Standby Mode Upgrade
mode, a manual upgrade is automatically conducted. Since the power of the unit is turned on internally, the screen may be on
slightly for the LCD product. This phenomenon may continue for more than 1 hour until the software upgrade is completed.
Alternative Software
To display the software version information.
HD Connection Guide ❑
This menu presents the connection method that provides the optimal quality for the HD TV.
Refer to this information when connecting external devices to the TV.
Contact Samsung ❑
TV Rear Panel
USB Drive
BN68-03043A.indb 24 2010-04-14 �� 4:56:29
To Next Page
Loading...
