3
Software Update:
Update the software
to the latest version
✎
To update later,
select Skip.
When Network Settings is complete, your product will check for a new software
version automatically. If new software is available, the product downloads and
installs the new software. When the download is complete, select Next.
✎
If you want to upgrade later, select Skip. For more information, refer to
Software Update section of this manual (page 93)
✎
This may take some time, depending on your network status.
✎
You can only upgrade software if your product has an active network
connection.
✎
If no new update software is available, a no new updates message appears
on the screen. Select OK.
4
Select Country.
(Depending on the
country)
Select the appropriate area by pressing the u or d button.
Press the ENTERE button to confirm your choice.
5
Auto Tuning (1):
Select where your
product signal comes
from.
Let’s find and store channels on your TV. Do you need to search for channels?
• Yes, I need to: All the channels available will be found and stored on your TV. If
you select this option, go to Step 6.
• No, I don’t need to: My set-top box provides all the channels that are
available, so I don't need to search for channels.
If you select this option, go to Step 8.
6
Auto Tuning (2):
Select the search
options.
Select the channel source to memorise. If you select Digital & Analogue, Digital or
Analogue, The Auto Tuning starts.
7
Auto Tuning (3):
Channel memorization
Channel memorisation stars. Channel memorisation can take up to 45 minutes,
depending on your cable system.
For more information, refer to Auto Tuning section of this manual. (page 52)
✎
Select Stop at any time to halt the memorization process.
8
Clock: Set the Clock Select Auto or Manual, and then select Next.
• Auto: Set the current time automatically.
• Manual: Allows you to manually set the current date and time.
Getting Started
To Next Page
Loading...
