9
Time Zone (Australia
only): Setting the your
Time Zone
This step is only available when the clock mode is set to Auto.
• Auto: Set the time zone automatically.
• Manual: Set the time zone manually.
✎
If you selected Manual, you can select whether to turn DST (Daylight Savings Time)
On or Off. (Depending on the country)
10
Setup Complete Review the Setup data, and then select Close to finish.
✎
The completed settings are displayed.
If You Want to Rerun Setup...
Menu → System → Setup
If You Want to Turn the Store Demo Mode On or Off.
To set or unset Store Demo mode outside of Setup, press the volume button on the product. When you see the volume
in the OSD, press and hold MENUm button on the product for 5 seconds.
If You Want to Reset This Feature...
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to
change the PIN number, use the Change PIN function. You should do Setup (Menu → System) again at home although
you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which
resets the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).
Getting Started
English - 24
To Next Page
Loading...
