13
Chapter 2. Hardware
Reverse side
• The colour and shape of parts may differ from what is shown.
IR IN
DVI /
MAGICINFO IN
HDMI IN
DP OUT
DP IN
IR OUT
DVI /
HDMI
AUDIO IN
RJ45AUDIO OUT
USB
PROXIMITY
SENSOR
USB
RS232C OUT
RS232C IN
Port Description
RS232C OUT Connects to MDC using an RS232C adapter.
RS232C IN
IR OUT Outputs the remote control signal.
IR IN Receives the remote control signal.
Port Description
USB
Connect to a USB memory device.
USB
PROXIMITY SENSOR
Connects to a USB device or proximity sensor.
PROXIMITY SENSOR: This must be connected to the cable
if the Proximity Sensor is in use.
DVI / MAGICINFO IN DVI IN: Connects to a source device using a DVI cable or
HDMI-DVI cable.
MAGICINFO IN: Use the (dedicated) DP-DVI cable when
connecting a network box (sold separately).
DP IN Connects to a source device using a DP cable.
HDMI IN Connects to a source device using an HDMI cable.
DP OUT Connects to another product using a DP cable.
DVI / HDMI AUDIO IN Receives sound from a source device via an audio cable.
AUDIO OUT Connects to the audio of a source device.
RJ45 Connects to MDC using a LAN cable.
To Next Page
Loading...
