65
Chapter 4. Remote control
Picture ▼
2nd 3rd Description
Digital Clean View If the broadcast signal received by your product is weak, you can activate the Digital Clean View feature to reduce
any static and ghosting that may appear on the screen.
• Received signal intensity is the strongest when the bar is green.
• When the signal is weak, try all the options until the the product displays the best picture.
MPEG Noise Filter Reduces MPEG noise to provide improved picture quality.
HDMI Black Level Selects the black level on the screen to adjust the screen depth.
Film Mode This mode is suitable to view movies.
Sets the product to automatically sense and process lm signals from all sources and adjust the picture for
optimum quality.
• Available in HDMI (1080i).
Dynamic Backlight Automatically adjust the backlight to provide the best possible screen contrast under the current conditions.
Picture Size Picture Size Different screen adjustment options are displayed depending on the current input source.
Do not set your product to 4:3 format for a long time.
The borders displayed on the left and right, or top and bottom of the screen may cause image retention (screen
burn) which is not covered by the warranty.
Zoom/Position Adjusts the picture zoom and position. This option is available when the input source is set to HDMI (1080i/1080p)
or DVI. Picture Size must be set to Custom for the option to be available.
• Custom under Picture Size is only enabled when Picture Mode is set to Video/Image while in DVI or DisplayPort
mode.
• If you want to reset the picture to its original position, select Reset in the Zoom/Position screen.
The picture will be set to its default position.
Resolution If the picture is not normal even when the resolution of the graphics card is one of the following, you can optimize
the picture quality by selecting the same resolution for the product as the PC using this menu.
• Available resolutions: AUTO / 1024x768 / 1280x768 / 1360x768 / 1366x768
To Next Page
Loading...
