English - 45
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW6HWXSWKHQSUHVVWKHENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW3&WKHQSUHVVWKHENTER button.
Change to the PC mode first.
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW$XWR$GMXVWPHQWWKHQSUHVVWKHENTER button.
Press the EXIT
button to exit.
How to Auto Adjust
Use the Auto Adjust function to have the TV set automatically adjust the video signals the monitor receives.
7KHIXQFWLRQDOVRDXWRPDWLFDOO\¿QHWXQHVWKHVHWWLQJVDQGDGMXVWVWKHIUHTXHQF\YDOXHVDQGSRVLWLRQV
This function does not work in DVI-Digital mode.
Setting up the TV with your PC
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW6HWXSWKHQSUHVVWKHENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW3&WKHQSUHVVWKHENTER button.
Change to the PC mode first.
2. Press the ENTER button to select "Image Lock".
3. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW&RDUVHRU)LQHWKHQSUHVVWKHENTER button.
3UHVVWKHŻRUŹEXWWRQVWRDGMXVWWKHVFUHHQTXDOLW\
Vertical stripes may appear or the picture may be blurry.
Press the ENTER button.
Press the EXIT
button to exit.
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning
alone, then do the frequency adjustments to the utmost and fine tune again(See page 44). After the noise has been reduced,
re-adjust the picture so that it is aligned on the center of the screen.
PC
Image Lock Ź
Position Ź
Auto Adjustment Ź
Image Reset Ź
TV
Move Enter Return
PC
Image Lock Ź
Position Ź
Auto Adjustment Ź
Image Reset Ź
TV
Move Enter Return
Auto Adjustment in Progress. Please Wait
Setup
ŸMore
Blue Screen : Off Ź
0HORG\ 2II Ź
PC
+RPHWKHDWHU3& 2II Ź
(QHUJ\6DYLQJ 2II Ź
HDMI Black Level :Normal Ź
ź0RUH
TV
Move Enter Return
Image Lock
Coarse 50
Fine 0
TV
Move Enter Return
50
Ÿ
Coarse
ź
Move Adjust Return