English - 31
Viewing Picture-in-Picture
This product has one built-in tuner, which does not allow PIP to function in the same mode. For example, you cannot watch one TV
channel in the main screen, and a different one in the PIP screen. Please see ‘PIP Settings’below for detaileds. You can use the
PIP feature to simultaneously watch two video sources. (See page 38 to select the PIP picture sound.)
While V-Chip (See page 56) is in operation, the PIP function cannot be used.
While xvYCC (See page 27) is in operation, the PIP function cannot be used.
Activating Picture-in-Picture
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW³6HWXS´WKHQSUHVVWKHENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW3,3WKHQSUHVVWKHENTER button.
2. Press the ENTER button again.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW2QWKHQSUHVVWKHENTER button.
If you turn the TV off while watching in PIP mode and turn it on again, the PIP
window will disappear.
You can view Analog TV broadcasts on the PIP screen (sub-picture) when the
main picture is from an external device connected to HDMI1,2,3,
Component1,2, or PC
Main picture Sub picture
Component 1,2
HDMI 1,2,3
PC
Analog TV broadcasts only
Alternately, you can press the PIP button on the remote control repeatedly to activate or
deactivate the PIP.
Move Enter Return
PIP
:
Size :
Position :
Channel : Cable 3
PIPTV
Off
On
Changing the PIP Channel
3. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³&KDQQHO´WKHQSUHVVWKHENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFWWKHGHVLUHGFKDQQHOLQWKH3,3ZLQGRZ
Press the ENTER
buttons.
MAIN: PC / HDMI 1,2,3 / Component 1,2
PIP: TV(Analog)
The channel can be active when the sub picture is set to TV.
Press the PIP Channel buttons on the remote control.
Move Enter Return
PIP : On
Ź
Size : Ź
Position : Ź
Channel : Cable 3 Ź
PIPTV
Move Enter Return
PIP : On
Size :
Position :
Channel : Cable 3
PIPTV
Ÿ
3
ź
Setup
ŸMore
)LOP0RGH 2II Ź
Wall-Mount Adjustment Ź
3,3 Ź
Function Help : Off Ź
SW Upgrade Ź
TV
Move Enter Return
To Next Page
Loading...
