Samsung LN-T5265F - WISELINK Function; WISELINK Menu and Controls

English - 63
1. Insert a USB drive containing the firmware upgrade into the WISELINK port on
the side of the TV.
2. Press the MENU button to display the menu.
 3UHVVWKHŸRUźEXWWRQWRVHOHFW6HWXSWKHQSUHVVWKHENTER button.
3.3UHVVWKHŸRUźEXWWRQWRVHOHFW6RIWZDUHXSJUDGHWKHQSUHVVWKHENTER button.
4. 3UHVVWKHŸRUźEXWWRQWRVHOHFW86%8SJUDGHWKHQSUHVVWKHENTER button.
The message Scanning for USB... It may take up to 30 seconds. is displayed.
Please be careful to not disconnect the power or remove the USB drive while
upgrades are being applied. The TV will shut off and turn on automatically after
completing the firmware upgrade. Please check the firmware version after the
upgrades are complete.
Upgrading the Software
Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG
(726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a
USB drive to the USB port located on located on the side of your TV.
SW Upgrade
Scanning for USB...
It may take up to 30 seconds.
Setup
ŸMore
Film Mode : Off Ź
Wall-Mount Adjustment Ź
PIP Ź
Function Help : Off Ź
SW Upgrade Ź
TV
Move Enter Return
TV Side Panel
USB Drive
1. Press the MENU button to display the menu.
Press the
ŸRUź buttons to select “Setup”, then press the ENTER button.
2.
Press the ŸRUź buttons to select “Light Effect”, then press the ENTER
button.
3.
Press the ŸRUź button to select “Off”, “In Standby”, “In Watching TV” or “Always”,
then press the ENTER button.
• Off: LED will not come on.
• In Standby: Turns the LED on in standby mode.
• In Watching TV: Turns the LED on while watching TV.
• Always: LED will come on after you turn the TV off.
Press the EXIT button to exit.
Setting the Light Effect (LN-T4065F / LN-T4665F / LN-T5265F)
You can turn on/off the blue LED on the front of TV.
Setup
ŸMore
Blue Screen : On Ź
Melody : Off Ź
PC
Ź
Home Theater PC : Off Ź
Light Effect : In Watching TV Ź
Energy Saving : Off Ź
ź0RUH
TV
Move Enter Return
Setup
ŸMore
Blue Screen : On
Melody : Off
PC
Home Theater PC : Off
Light Effect : Watching Mode On
Energy Saving : Off
ź0RUH
TV
Move Enter Return
Off
In Standby
In Watching TV
Always